Galaxy S6 Backplate

Our aluminum backplates are interchangeable to fit any mood or style. The backplate has a white coating that will allow all white areas within the image to print as a bright white area.This product can be used with our stack and grip cases for the Galaxy S6
2.5" x 5"
Item #:

Be the first to review this product

Rate or review to get 200 PW Reward Points

Availability: In stock

1-9 10+
$2.12 $1.12
or Clear Form
  • Details
  • Videos
  • Reviews
  • Product Details

    Sublimation on a Backplate w Case Included Application Instructions

    1. Set temperature to 400 degrees Fahrenheit.
    2. Set timer to 1 minute (60 seconds).
    3. Set Pressure at medium.
    4. Remove protective film from product (backing plate).
    5. Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
    6. Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
    7. Put a blank sheet of paper on heat press platen to keep it clean.
    8. Place substrate face down on the heat press (metal surface up).
    9. Cover with a non stick sheet.
    10. Press at 400 degrees F for 1-3 minutes with medium pressure
    11. Remove immediately from press once finished and peel hot.
    12. When backplate is cool, remove the paper covering the adhesive on the case.
    13. Align the backplate within the indentation and adhere to phone case.
    Click Here For Video Instructions
  • Explaining Differences On All Phone Cases
    Printing a Phone Backplate with Sublimation
  • Customer Reviews

    Rate or review to get 200 PW Reward Points(What is this?)