$351.99
Features
| SKU | DTFST-EHPF-13 |
|---|---|
| Compatible Equipment | Prestige L2, Prestige XL2 |
| Film Size | 13" wide - A3+ |
| Peel Type | Hot Peel |
| Finish | Matte |
Features
- Solid white for more vibrant colors
- Even and regular particles for the fine quality of your graphic
- Good adherence
- Finely coated film for no pinholes
- 13" x 109 yards per roll
Please Note:
- All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink
- Actual Measurement can be slightly different on each batch. (+/- 1/4")
Caution
Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.
Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.
Ecofreen DTF Hot Peel Film Application Instructions
Application Instructions
- Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
- Apply hot melt powder evenly and remove the excess powder.
- Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315°F, 1min).
- Transfer the image by heat press at 330°F for 15sec with medium pressure.
- After the first press:
- Option 1: Wait for 4-6 seconds and remove the film gently.
- Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently.
- Heat press again at 330°F 5-10sec. with medium pressure to enhance softer hand feel.
Warning
- Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.
- Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.
Write Your Own Review
Check items to add to the cart or
