At last a technological breakthrough has transpired, giving the garment industry a digital, high quality, SOFT solution for laser transfers. This "shift" in technology allows the toner to absorb into the surface coating of the paper. The coating acts to shield and later bond the inks to the fabric fibers. These advancements allow for the softest hand possible because the inks and coatings are bonded to the actual fibers. Recommended Laser printers: Canon, Ricoh, Okidata, or Xerox.
LASERSOFT EZ PEEL TRANSFER PAPER 8.5X11
|Recommended Printer Brand||Canon, Ricoh, Okidata, Xerox|
|Application Steps||1 Step|
Since there are so many makes and models of printers it is virtually impossible to guarantee the results on any one printer. We can only suggest that you check with the manufacturer regarding the use of transfer papers. We cannot assume any liability for the use of our transfer papers.
- Vibrant, durable and "natural" looking
- No plastic sheen
- Stretches and Breathes
- No splitting, cracking, peeling, or separating from your garment
- Best on light colored 100% cotton or 50/50 cotton/poly blends
- Use as hot or warm peel
Lasersoft Easy Peel Transfer Paper Application Instructions
For light colored garments only, Designed for both fuser oil and oil-less laser printers and copiers.
- Design or select your image on the computer.
- Print the image in reverse/mirrored format using a heavy paper mode.
- Set heat press at 375 degrees with medium-heavy pressure.
- Pre-heat garment for 10-15 seconds to remove moisture.
- Place transfer face down and press for 25 seconds.
- For best results leave on the heat press, wait 10-15 seconds and then peel the paper in a smooth even motion.
- To improve the feel or 'hand', stretch the garment in all directions while still hot.
Tips & Notes
- Manufacturer and seller are not responsible for damaged caused by misuse of this paper.