Customer Reviews
Cart: 0 Item(s): $0.00

Siser BlackBoard Vinyl 12" x 5 yd Roll

Write it, Wipe it, Repeat! Now you can turn any fabric into a writable surface that can be used over and over again! New BlackBoard™ heat transfer vinyl by Siser®, transforms plain materials into a walking chalkboard – without making you feel like a walking sandwich board! Lightweight and super soft, BlackBoard is unlike any HTV you’ve ever experienced. With a low application temperature and warm peel carrier, this HTV is ideal for heat sensitive materials. Compatible with standard chalk, Blackboard is as easy to re-use as it is to apply. Simply wipe clean with a damp cloth to start again! There are countless ways to advertise, organize, and customize with BlackBoard heat transfer vinyl.


More product details…
  • 0 Colors
  • Matte
  • Layer 1 Colors
  • Most Fabrics
Brand:
Siser
Application:
General
Ideal Application:
Most Fabrics
Finish:
Matte
Max Layers:
1
Width:
11.5" +/-
Item #:
VN-SBB-Y-12

Be the first to review this product

Review to get 200 PW Reward Points (Up to 600 Points)

Availability: Out of stock

Price & Order   (Per Roll)

No options of this product are available.

Sold by the Roll

Total Quantity: 0

Total Price: $0.00


  • Details
  • Instructions
  • Cutter Settings
  • Reviews
  • Product Details

    Features
    • Width: 11.5" +/- (may vary in size)
    • Length: By the roll.
    • Suitable for Cotton, polyester, poly/cotton blends
    • Thickness : 90 microns (USA : 3.5 mil)
    • Carrier: Pressure sensitive backing
    • Can be layered
    Maintenance
    • Do not dry clean.
    • Machine wash COLD / mild detergent.
    • Dry at normal setting.
    • No chlorine bleach.
    • Wait 24 hours before first wash.
  • Application Instructions

    • 100% cotton, Poly/cotton blends, 100% polyester
    • Cut in reverse
    • Weed excess material
    • Preheat garment for 2-3 seconds
    • Apply design at 275°F/135°C
    • Use light/medium pressure for 15 seconds
    • Peel carrier warm or cold
    • Wait 24 hours before first wash.

    Application Instructions

    • 100% cotton, Poly/cotton blends, 100% polyester
    • Set iron dial between Cotton and Linen
    • Cover design with Kraft paper or non-stick cover sheet
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design for 10-15 seconds
    • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
    • Peel carrier hot or cold
    • Wait 24 hours before first wash.
  • Cutter Settings

    • Blade: Standard
    • Setting: Paper

    Cutter Settings

    • Blade: Standard, 2
    • Setting: Heat Transfer
    • Material: Smooth
    • Speed: 5
    • Thickness: 8

    Cutter Settings

    • Blade: 2
    • Cut Speed: 1
    • Cut Pressure: 1

    Cutter Settings

    • Blade: 45°
    • Force: 70g-80g
    • Offset: .250
    • Speed: 50 cm/s

    Cutter Settings

    • Blade: 45°/60°
    • Gram Force: 60-65
    • Speed: 300mm/s
    • *Blade Advancing Varies
  • Customer Reviews

    Rate or review to get 200 PW Reward Points(What is this?)