Metallic Foil Look with a Super Soft Feel! Dazzle customers with this precious metal HTV! Available in silver and gold, Metal features show stopping shine with a smooth finish and soft hand that can be washed and worn without becoming lackluster. This fashion forward material is ideal for bridal parties, spirit wear, and any occasion that needs a touch of gleaming chrome! Metal is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories. Due to Metal’s pressure sensitive carrier, you may find it easier to weed the vinyl on a heated surface for smooth weeding!
Price Per Yard (per color)
1-4
$10.99
5-9
$9.40
10-49
$8.99
50+
$7.63
Features
| Brand | Siser |
|---|---|
| SKU | VN-MT-Y-20 |
| Vinyl Application | Heat Applied |
| Vinyl Type | Metallic |
| Finish | Metallic |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, 100% Polyester |
| Vinyl Thickness | 3.9 mils |
Features
- Width: 19.5" +/- (may vary in size)
- Length: By the yard.
- Carrier: Pressure sensitive backing.
Maintenance
- Do not dry clean.
- Machine wash COLD / mild detergent.
- Hang to dry
- No chlorine bleach.
- Wait 24 hours before first wash.
- *Metallic is a unique product - cracking and delamination may occur after washing. Results are not predictable.
Resources
Siser Metal Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather, Sublimated polyester
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier cold
- Wait 24 hours before first wash
Siser Metal Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheetand re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Metallic Vinyl Cutter Settings
Brother Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Brother Scan N Cut DX Cutter Settings
- Blade: Autoblade
- Cut Speed: 5
- Half Cut: Auto
Cricut Cutter Settings
- Blade: Standard
- Setting: Iron-on
Galaxy Cutter Settings
- Blade: 45°/60°
- Gram Force: 100-110
- Speed: 300mm/s
- *Blade Advancing Varies
GCC Cutter Settings
- Blade: 45˚
- Gram Force: 180-190
- Offset: .250
- Speed: 30 cm/s
Graphtec Cutter Settings
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Juliet/Romeo Cutter Settings
- Blade: Juliet 45°
- Force: 5-10
- Offset: 0.250
- Speed: 10
Roland Cutter Settings
- Blade: 45°
- Force: 80g-90g
- Offset: .250 cm/s
- Speed: 30-50 cm/s
Scan N Cut Cutter Settings
- Blade: Standard, 2
- Cut Speed: 1
- Cut Pressure: 3
Silhouette Cutter Settings
- Blade: Standard, 2
- Material: Heat Transfer (Smooth)
- Speed: 8
- Force: 6
Write Your Own Review