CLEARANCE SALE   Huge savings up to 70%    SHOP NOW >
Clearance!

Siser EasyWeed in now available in machine cut sheets! The actual sheet size is 12" x 14.75" with an acceptable variance range +/- 1/4" on either dimension. Siser EasyWeed is a polyurethane, ready-to-cut heat transfer vinyl designed for custom garment decoration. Siser EasyWeed is in a league of its own because of it's sticky pressure sensitive carrier which allows you to cut and weed small letters and fine designs very easily. Much thinner than other film materials, Siser EasyWeed is perfect for single color or multi-layered applications. Siser EasyWeed also offers excellent durability, even after repeated washings. Available in 3 popular colors shown below.

Choose one or more colors Hover color swatch to see larger preview.

Siser Easyweed Fluorescent By The Sheet

Rating:
100% of 100
item #
VN-EWF-S-15
Features
More Information
Brand Siser
SKU VN-EWF-S-15
Vinyl Application Heat Applied
Vinyl Type Neon
Finish Semi Gloss
Transfer Vinyl Max Colors Layerable
CPSIA Certified Yes
Home Iron Compatible Yes
Transfer Vinyl Ideal Applications 100% Cotton, Cotton/Poly Blends, Leather, 100% Polyester
Vinyl Thickness 3.5 mils
Features
  • Width: 12"x14.5" +/- (may vary in size)
  • Length: By the sheet.
  • Carrier: Pressure sensitive backing.
Maintenance
  • Do not dry clean.
  • Machine wash WARM / mild detergent.
  • Dry at normal setting.
  • No chlorine bleach.
  • Wait 24 hours before first wash.
  • Turn garment inside out
Resources

Siser EasyWeed Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester, Leather.
  2. Cut in reverse
  3. Weed excess material
  4. Preheat garment for 2-3 seconds
  5. Apply design at 305°F/150°C
  6. Use medium pressure for 10-15 seconds
  7. Peel carrier hot or cold
  8. Wait 24 hours before first wash.

Siser EasyWeed Home Iron Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester
  2. Set iron dial between Cotton and Linen
  3. Cover design with Kraft paper or non-stick cover sheet
  4. Place on flat, hard surface (ironing board not recommended)
  5. Press iron with medium/firm pressure (do not slide iron)
  6. Press each section of design for 10-15 seconds
  7. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  8. Peel carrier hot or cold
  9. Wait 24 hours before first wash.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account