Free Shipping On orders of $49 or more. Restrictions Apply. See Details >

This is the perfect size of EasyWeed™ to fit the needs of end-users with craft cutters. This size allow users in the craft industry to purchase a continuous roll rather than sheets of film.

Pricing Per Yard
1-4
$8.99
5-9
$7.79
10-49
$7.29
50+
$6.49
Choose one or more colors Hover color swatch to see larger preview.
Fluorescent Green
Fluorescent Orange
Fluorescent Pink
Fluorescent Yellow

Siser Easyweed Fluorescent By the Yard 12"

Rating:
93% of 100
item #
VN-EWF-Y-12
Features
  • Width: 11.5" +/- (may vary in size)
  • Length: By the roll.
  • Suitable for Cotton, polyester, poly/cotton blends, and leather
  • Thickness : 90 microns (USA : 3.5 mil)
  • Carrier: Pressure sensitive backing.
Maintenance
  • Do not dry clean.
  • Machine wash WARM / mild detergent.
  • Dry at normal setting.
  • No chlorine bleach.
  • Wait 24 hours before first wash.

Siser EasyWeed Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester, Leather.
  2. Cut in reverse
  3. Weed excess material
  4. Preheat garment for 2-3 seconds
  5. Apply design at 305°F/150°C
  6. Use medium pressure for 10-15 seconds
  7. Peel carrier hot or cold
  8. Wait 24 hours before first wash.

Siser EasyWeed Home Iron Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester
  2. Set iron dial between Cotton and Linen
  3. Cover design with Kraft paper or non-stick cover sheet
  4. Place on flat, hard surface (ironing board not recommended)
  5. Press iron with medium/firm pressure (do not slide iron)
  6. Press each section of design for 10-15 seconds
  7. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  8. Peel carrier hot or cold
  9. Wait 24 hours before first wash.

Siser EasyWeed Vinyl for GCC Cutters

Cutter Settings

  • Blade: 45˚
  • Gram Force: 80
  • Offset: .250
  • Speed: 30 cm/s

Siser EasyWeed Vinyl for Cricut Cutters

Cutter Settings

  • Blade: Standard
  • Setting: Iron-on

Siser EasyWeed Vinyl for Roland Cutters

Cutter Settings

  • Blade: 45°
  • Gram Force: 80-90
  • Offset: .250
  • Speed: 25-50 cm/s

Siser EasyWeed Vinyl for Galaxy Cutters

Cutter Settings

  • Blade: 45°/60°
  • Gram Force: 60-65
  • Speed: 300mm/s
  • *Blade Advancing Varies

Siser EasyWeed Vinyl for Silhouette Cutters

Cutter Settings

  • Blade: Standard, 3
  • Setting: Heat Transfer Material (smooth)
  • Speed: 8
  • Thickness: 6

Siser EasyWeed Vinyl for Brother Cutters

Cutter Settings

  • Blade: 2
  • Cut Speed: 1
  • Cut Pressure: 1

Siser EasyWeed Vinyl for Graphtec Cutters

Cutter Settings

  • Blade: 45°
  • Gram Force: 8-9
  • Tool: CB09U+0
  • Speed: 30 cm/s

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account