Air Freshener - 6/Sheet
Freshen up your car with our Subli-fabricboard(SFB) air freshener. This is made with high density polyester fiber that is eco friendly and 2.5mm thick! Both sides are sublimatable and comes with a red string and bag for easy packaging. After sublimating, add your desired fragrance to the corners and enjoy! One sheet contains 6 air fresheners.
- Pro World
Availability: In stock
Textprint Sublimation Paper on Subli-Fabricboard Products
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 60 seconds.
- Set Pressure at light.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face up on the heat press, with the transfer paper on top.
- Cover with a non stick sheet.
- Press at 400 degrees F for 60 seconds with light pressure
- Remove immediately from press once finished and peel hot.
- Place a heavy object on air freshener for a few seconds while still hot to ensure the air freshener stays flat.
- Repeat the steps above for the reverse side of the air freshener.
- With a toothpick or sharp object, punch out the holes at the top of the air freshener.
- Place a drop of colorless scented oil on each corner of the air freshener.
Sublimation Air Fresheners