Customer Reviews
Cart: 0 Item(s): $0.00

11" Square Rock Slate

Our 11" photo rock slate is a 1/4" thick, with a white coating that is ready to sublimate. Each piece is handcrafted and chiseled with imperfect edges to make each slate unique. Memorialize a loved one or use your favorite inspirational quote. The Rock Slate comes with two black plastic stands to display on any desk or mantle. Please be aware that these are natural stone and slight imperfections in the surface may occur.

Brand:
Pro World
Finish:
N/A
Substrate:
Slate
Size:
11x11
Item #:
SB-S-086
Review to get 200 PW Reward Points (Up to 600 Points)

Availability: In stock

Your Price: $7.29


or Clear Form
  • Details
  • Instructions
  • Videos
  • Reviews
  • Product Details

  • Application Instructions

    1. Set temperature to 400 degrees Fahrenheit (200 C)
    2. Set timer to 5:30-7 minutes depending on the rock slate size. The larger the rock slate, the longer the time should be.
    3. Keep top tray in the 3D Vacuum press, and connect tubing to the bottom of the tray.
    4. Press Heating Button twice so both lights are on.
    5. Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
    6. Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
    7. Place substrate face up in the top tray of the 3D Vacuum Press.
    8. Press vacuum button. Then timing button to begin the timer.
    9. Press at 400 degrees F for 5:30-7 minutes.
    10. Remove immediately from press once finished and peel hot. Use caution as rock slate will be very hot.

    Application Instructions

    1. Set temperature to 415 degrees Fahrenheit.
    2. Set timer to 300-400 seconds depending on the rock slate size. The larger the rock slate, the longer the time should be.
    3. Set Pressure at medium-heavy. Use caution as the rock slate can crack with too much pressure.
    4. Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
    5. Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
    6. Place substrate face up on the heat press.
    7. Cover with a piece of fabric (cut tshirt) to protect the coating of the rock slate.
    8. Then cover with a silicon pad.
    9. Press at 415 degrees F for 300-400 seconds with medium-heavy pressure.
    10. Remove immediately from press once finished and peel hot. Use caution as rock slate will be very hot.
    Click Here For Video Instructions
  • Sublimation Printing On Rock Slates
  • Customer Reviews

    Rate or review to get 200 PW Reward Points(What is this?)
    Good product Review by Thomas
    Quality
    Price
    Value
    Great for weddings and special occasions. My customers love them! (Posted on 12/12/17)
    ROCK ON ! Review by Michael
    Quality
    Price
    Value
    ROCK ON !

    Sorry, couldn't resist the title. This is a great product. I have done a collage with them. I have made several and everyone loves them.

    Note: My printer could print 11x17 but that woudl be pushing it for the width--I used my bypass tray for the first time with 13x19 paper which gave me some paper to wrap around the tile to prevent ghosting (the white border). (Posted on 10/4/17)
    Nice ... but way too big for my printer Review by Pat
    Quality
    Price
    Value
    I wish someone had told me / cautioned me when I ordered these that I would need a printer that could print over 12 inches wide ... these are just under 12 inches square, and my printer only prints 8 1/2 inches wide ... I could have shipped them back, but shipping would have been ridiculous, so I'll just figure something out or hold on to them until I can upgrade my printer. Love these rock slates though. (Posted on 7/15/17)
    Show More