$30.95
In Stock - Available for immediate delivery
Features
| SKU | SB-S-252 |
|---|---|
| Finish | Glossy |
| Coating | White |
| Substrate | Ceramic |
| Sub Blank Size | 12 oz |
| Substrate Color | White |
Texprint Sublimation Paper on a Ceramic Mug with Mug Press
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 240-270 seconds.
- Set Pressure at heavy.
- Print a mirror image onto Texprint Paper.
- Trim the edges of the image and wrap around mug.
- Attach the image to mug using transfer release tape.
- Wrap mug with a teflon sheet and place in mug press.
- Press at 400 degrees F for 4-4.5 minutes with heavy pressure.
- Remove immediately from press once finished and peel hot.
- Dip mug into warm water to end the sublimation process and avoid ghosting.
Texprint Sublimation Paper on Mugs with a 3D Vacuum Heat Press
Application Instructions
- Turn the 3D Vacuum Heat press on.
- Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing)
- Set the Temperature to 392 degrees F (200 degrees C) and time to 500 seconds. If filling the unit with 8 mugs, use 500-600 seconds (8.5-10 minutes).
- Print a mirror image onto Texprint Paper.
- Trim the edges of the image and wrap around mug.
- Attach the image to mug using transfer release tape.
- Wrap mug with mug wrap.
- Place upside down within the heat press.
- Press vacuum button
- Press the time button
- Remove immediately once finished and peel hot. Use caution as mug will be very hot.
- Dip mug into warm water to end the sublimation process and avoid ghosting.
Write Your Own Review