As Low As $0.77
Our glossy white aluminum name badge has rounded corners with a thickness of .03″ (0.76mm). Pins are not included.
In Stock - Available for immediate delivery
3 x 1.5 NAME BADGE
|Sub Blank Size||3x1.5|
Textprint Sublimation Paper on Photo Panels
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 1-3 minutes.
- Set Pressure at medium.
- Remove protective film from product.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face down on the heat press (metal surface up).
- Cover with a non stick sheet.
- Press at 400 degrees F for 1-3 minutes with medium pressure.
- Remove immediately from press once finished and peel hot.
Write Your Own Review