Clearance!
Performance wear has met its match! Siser EasyWeed™ Stretch delivers all the benefits of our EasyWeed™ heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any Siser material, EasyWeed™ Stretch has an ultra-matte finish and a soft hand that’s available in 21 popular colors. EasyWeed™ Stretch is laminated onto a pressure-sensitive carrier that allows for cutting and weeding detailed designs. EasyWeed™ Stretch is CPSIA Certified, so it's safe on garments for all ages!
Features
| Brand | Siser |
|---|---|
| SKU | VN-ES-Y-15 |
| Vinyl Application | Heat Applied |
| Vinyl Type | EasyWeed Stretch |
| Finish | Semi Gloss |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Leather, Lycra / Spandex, 100% Polyester |
| Vinyl Thickness | 3.35 mils |
Features
- Width: 14.5" +/- (may vary in size)
- Length: By the yard.
- Carrier: Pressure sensitive backing.
Maintenance
- Do not dry clean.
- Machine wash WARM / mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Wait 24 hours before first wash.
Resources
Siser EasyWeed Stretch Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester, Leather, Lycra®/Spandex.
- Cut in reverse
- Weed excess material
- Cover with a non-stick sheet or multipurpose paper
- Preheat garment for 2-3 seconds
- Apply design at 320°F/160°C
- Use firm pressure for 20 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Stretch Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with firm pressure (do not slide iron)
- Press each section of design for 20 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Stretch Vinyl Cutter Settings
Brother Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Brother Scan N Cut DX Cutter Settings
- Blade: Autoblade
- Cut Speed: 5
- Half Cut: Auto
Cricut Cutter Settings
- Blade: Standard
- Setting: Iron-On
Galaxy Cutter Settings
- Blade: 45°/60°
- Gram Force: 60-65
- Speed: 300mm/s
- *Blade Advancing Varies
GCC Cutter Settings
- Blade: 45°
- Gram Force: 60-70
- Offset: .250
- Speed: 30 cm/s
Graphtec Cutter Settings
- Blade: 45°
- Gram Force: 60-70
- Offset: .250
- Speed: 30 cm/s
Juliet/Romeo Cutter Settings
- Blade: Juliet 45°
- Force: 5-10
- Offset: 0.250
- Speed: 10
Roland GX-24 Cutter Settings
- Blade: 45°
- Gram Force: 60-70
- Offset: .250
- Speed: 30 cm/s
Silhouette Cutter Settings
- Blade: Standard
- Setting: Heat Transfer Material (Smooth)
- Blade Setting: 4
- Speed: 8
- Thickness: 4
Write Your Own Review