CLEARANCE SALE   Huge savings up to 70%    SHOP NOW >
As Low As $3.89
1-11
$4.99
12+
$3.89

11 oz Silicone Sublimation Mug Wrap with easy to close and quick release clamp fastener. This product makes it effortless to produce an imprinted mug with a full picture that can reach all the way around. At this cost efficient price, it makes the perfect tool if you are just venturing over to mug sublimation or transitioning from a mug press.

Use with our 3D sublimation vacuum heat press only!

In Stock - Available for immediate delivery

MUG WRAP - 11 OZ.

Rating:
92% of 100
item #
SB-S-024
Features
More Information
SKU SB-S-024
Sub Blank Size 11 Oz.

Texprint Sublimation Paper on Mugs with a 3D Vacuum Heat Press

Application Instructions

  1. Turn the 3D Vacuum Heat press on.
  2. Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing)
  3. Set the Temperature to 392 degrees F (200 degrees C) and time to 500 seconds. If filling the unit with 8 mugs, use 500-600 seconds (8.5-10 minutes).
  4. Print a mirror image onto Texprint Paper.
  5. Trim the edges of the image and wrap around mug.
  6. Attach the image to mug using transfer release tape.
  7. Wrap mug with mug wrap.
  8. Place upside down within the heat press.
  9. Press vacuum button
  10. Press the time button
  11. Remove immediately once finished and peel hot. Use caution as mug will be very hot.
  12. Dip mug into warm water to end the sublimation process and avoid ghosting.

Texprint Sublimation Paper on Mugs with a 3D Vacuum Heat Press

Application Instructions

  1. Turn the 3D Vacuum Heat press on.
  2. Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing)
  3. Set the Temperature to 392 degrees F (200 degrees C) and time to 500 seconds. If filling the unit with 8 mugs, use 500-600 seconds (8.5-10 minutes).
  4. Print a mirror image onto Texprint Paper.
  5. Trim the edges of the image and wrap around mug.
  6. Attach the image to mug using transfer release tape.
  7. Wrap mug with mug wrap.
  8. Place upside down within the heat press.
  9. Press vacuum button
  10. Press the time button
  11. Remove immediately once finished and peel hot. Use caution as mug will be very hot.
  12. Dip mug into warm water to end the sublimation process and avoid ghosting.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account