As Low As
$1.69
1-49
$1.99
50+
$1.69
In Stock - Available for immediate delivery
Features
| SKU | SB-S-227 |
|---|---|
| Brand | Best Sub |
| Finish | Glossy |
| Coating | White |
| Substrate | Ceramic |
| Sub Blank Size | 3.5” |
| Protective Film | No |
| Mirror Image | Yes |
| Substrate Color | White |
Texprint Sublimation Paper On Ceramic Coasters
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 6-8 minutes depending on tile size. The larger the tile, the longer the time should be.
- Set Pressure at light. Use caution as the ceramic tile can crack with too much pressure.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Place a sof-fusion pressing pillow on the bottom pad of heat press to cushion the ceramic tile.
- Place substrate face down on the heat press, with the back of the ceramic tile facing up.
- Cover with a non stick sheet.
- Press at 400 degrees F for 6-8 minutes with light pressure.
- Remove immediately from press once finished and peel hot. Use caution as tile will be very hot.
Write Your Own Review