Customer Reviews
Cart: 0 Item(s): $0.00

Silver Id Tag 1 Sided

Silver Id Tag 1 Sided

ID Tags are known to some as dog tags, they can be decorated with pictures, team names, logo and more. Available in white gloss or silver in a .045″ (1.14mm) thick aluminum. Ring not included.

1.13" x 2"
Item #:
Review to get 200 PW Reward Points (Up to 600 Points)

Availability: In stock

1-49 50+
$1.34 $1.12
or Clear Form
  • Details
  • Instructions
  • Videos
  • Reviews
  • Product Details

  • Application Instructions

    1. Set temperature to 400 degrees Fahrenheit.
    2. Set timer to 1-3 minutes.
    3. Set Pressure at medium.
    4. Remove protective film from product (if applicable).
    5. Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
    6. Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
    7. Put a blank sheet of paper on heat press platen to keep it clean.
    8. Place substrate face down on the heat press (metal surface up).
    9. Cover with a non stick sheet.
    10. Press at 400 degrees F for 1-3 minutes with medium pressure
    11. Remove immediately from press once finished and peel hot.
    Click Here For Video Instructions
  • Sublimation Printing On Metal Surfaces
  • Customer Reviews

    Rate or review to get 200 PW Reward Points(What is this?)
    made with perfection Review by Mj
    I made these for a football team and the parents loved them. (Posted on 8/15/18)
    the worst ever Review by jessica
    i called pro world and they did nothing to help with this awful product you can’t tell which side to put the image on.. (Posted on 9/22/17)
    Don't buy these Review by Samantha
    These are one sided printing only. There is a protective coating that has to be removed before you sublimate, however you can't tell which side the coating is on and you can't remove it without putting it thru the heat press first. I reached out to ProWorld, who was great, but came to the same conclusion. (Posted on 3/9/17)