Customer Reviews
Cart: 0 Item(s): $0.00

Oval Tile Motif

This oval tile insert is made of a 0.25″ (6.35 mm) thick, one-sided gloss white hardboard. There is a pre-applied self-adhesive on the back of the tile to attach it to the Cross Plaque. (sold separately).

4.219" x 5.969"
Item #:
Review to get 200 PW Reward Points (Up to 600 Points)

Availability: In stock

1-11 12-19 20+
$2.49 $2.17 $2.35
or Clear Form
  • Details
  • Instructions
  • Videos
  • Reviews
  • Product Details

  • Application Instructions

    1. Set temperature to 400 degrees Fahrenheit.
    2. Set timer to 60 seconds.
    3. Set Pressure at medium.
    4. Remove protective film from product.
    5. Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
    6. Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
    7. Put a blank sheet of paper on heat press platen to keep it clean.
    8. Place substrate face up on the heat press, with the transfer paper on top.
    9. Cover with a non stick sheet
    10. Press at 400 degrees F for 60 seconds with medium pressure
    11. Remove immediately from press once finished and peel hot.
    Click Here For Video Instructions
  • Printing on Coasters or Hardboards
  • Customer Reviews

    Rate or review to get 200 PW Reward Points(What is this?)
    Great oval piece for multiple applications Review by Robert Franco
    Be sure to remove the clear film on these before trying to sublimate! These are nice and can be used with the crosses for sell on here as well. These did not come with adhesive backing, but mounting tape from 3M worked well for my application. I believe the crosses they sell on here include mounting tape. (Posted on 6/9/16)