As Low As
$1.99
1-24
$2.48
25-49
$2.29
50+
$1.99
In Stock - Available for immediate delivery
SANDSTONE CAR COASTER is available to buy in increments of 5
Features
| SKU | SB-S-007A |
|---|---|
| Finish | Matte |
| Coating | White |
| Substrate | Sandstone |
| Sub Blank Size | 2.56" |
| Protective Film | No |
| Mirror Image | Yes |
| Substrate Color | White |
Texprint Sublimation Paper on Sandstone Coasters
Application Instructions
- Set temperature to 356 degrees Fahrenheit.
- Set timer to 60-180 seconds.
- Set Pressure at medium.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face up on the heat press, with the transfer paper on top. (We recommend printing 1 coaster at time).
- Cover with a non stick sheet.
- Press at 356 degrees F for 60-180 seconds with medium pressure.
- Remove immediately from press once finished and peel hot.
Write Your Own Review