Silhouette Transfer Tape Application Instructions
Application Instructions
- After your vinyl has been cut and unloaded from the Silhouette machine, weed away excess vinyl until only your design remains on the backing sheet.
- Cut a piece of the transfer tape slightly larger than your design and remove the transfer tape liner.
- Postion transfer tape on top of your vinyl design and press firmly.
- The vinyl should now be adhered to the transfer tape as you remove the vinyl from the backing.
- Position your design onto the desired surface.
- Press down firmly with a flat-edged tool (such as a silhouette scraper) over the entire design to remove any air bubbles.
- Peel away transfer tape.