As Low As $2.99
Freshen up your car with our thick felt air freshener. This is made with high density polyester fiber that is eco friendly and 2.5mm thick! Both sides are sublimatable and come with a string and bag for easy packaging. After sublimating, add your desired fragrance to the corners and enjoy! One sheet contains 6 air fresheners.
In Stock - Available for immediate delivery
CIRCLE AIR FRESHENER
|Sub Blank Size||3.19"|
Texprint Sublimation Paper on Subli-Fabricboard Products
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 40 seconds.
- Set Pressure at light.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face up on the heat press, with the transfer paper on top.
- Cover with a non stick sheet.
- Press at 400 degrees F for 60 seconds with light pressure
- Remove immediately from press once finished and peel hot.
- Place a heavy object on air freshener for a few seconds while still hot to ensure the air freshener stays flat.
- Repeat the steps above for the reverse side of the air freshener.
- With a toothpick or sharp object, punch out the holes at the top of the air freshener.
- Place a drop of colorless scented oil on each corner of the air freshener.
Write Your Own Review