As Low As $0.69
Name badges are .09″ (2.29 mm) thickness. This product comes in a gloss white finish. Pins are not included.
In Stock - Available for immediate delivery
3 x 1.25 NAME BADGE
|Sub Blank Size||1.25" x 3"|
Textprint Sublimation Paper on FRP Products
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 60 seconds.
- Set Pressure at medium.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face up on the heat press, with the transfer paper on top.
- Cover with a non stick sheet.
- Press at 400 degrees F for 60 seconds with medium pressure
- Remove immediately from press once finished and peel hot.
Write Your Own Review