Use ColorPro Direct to Film Nozzle Busting Solution to clear blocked nozzles, especially after partial head strikes. Simply fill the capping station with the solution and park the print head overnight for the best results.

NOTE: DTF equipment should be used in a well-ventilated area with a filtration system. We recommend using a fume extractor to handle the fumes caused by powder curing and a ventilator for filtering DTF powder if it becomes airborne due to handling. Protective gear such as gloves, safety goggles and/or smocks or aprons should be used to maintain the safety of the user. DTF inks and films require a good humidity environment - over 50% humidity is strongly advised to reduce the risk of ink clogs and film buckling. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user's risk.