White DTF Powder is best for printing on white or light colored garments. Uninet DTF Transfer Adhesive Powder is a proprietary, specially formulated Thermoplastic Polyurethane (TPU) Hot Melt Adhesive Powder, also referred to as 'PreTreat' powder.

Print to DTF Transfer Sheets or Rolls; then cover your print with DTF Adhesive Powder powder and cure; and finally heat press it to your garments or textiles.

NOTE: DTF equipment should be used in a well-ventilated area with a filtration system. We recommend using a fume extractor to handle the fumes caused by powder curing and a ventilator for filtering DTF powder if it becomes airborne due to handling. Protective gear such as gloves, safety goggles and/or smocks or aprons should be used to maintain the safety of the user. DTF inks and films require a good humidity environment - over 50% humidity is strongly advised to reduce the risk of ink clogs and film buckling. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user's risk.