This capping solution is for capping and maintenance of your DTG or DTF system and to help prevent clogs. This is to be used only for saturating the printhead resting cap on the capping station at the end of the business day, and not intended to be used as a cleaning solution for the printhead cleaning or unclogging solution (use the Cleaning Solution or Xtreme Cleaning Solution to help resolve clogs or for cleaning purposes). For long-term maintenance (such as when you're going on vacation), use the Maintenance Solution instead.

NOTE: DTF equipment should be used in a well-ventilated area with a filtration system. We recommend using a fume extractor to handle the fumes caused by powder curing and a ventilator for filtering DTF powder if it becomes airborne due to handling. Protective gear such as gloves, safety goggles and/or smocks or aprons should be used to maintain the safety of the user. DTF inks and films require a good humidity environment - over 50% humidity is strongly advised to reduce the risk of ink clogs and film buckling. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user's risk.