When everything else fails, use this solution as a Last Chance effort to help unclog the most stubborn print head clogs! While there is no guarantee that an "uncloggable" clog can be undone, if you're down to the wire and feel like you need to replace your printhead, give this solution a chance - the Last Chance solution has saved countless printheads that were declared "dead".
This solution is for use to attempt to resolve clogs in printheads considered "dead" or un-revivable due to the most extreme of clogs or to flush inks from tubing that are also extremely clogged. DO NOT USE for wet capping. DO NOT LEAVE in the printhead (run a cleaning with regular cleaning solution after use).
NOTE: Use of this solution needs to be complimented with a printhead cleaning / flush utilizing the regular cleaning solution AFTER use of the LAST RESORT solution. While this Last Chance cleaning solution can unclog extremely challenging clogs, it should not remain in the printheads as it should not mix with your inks. Once you have resolved your clog with the Last Chance cleaning solution.
IMPORTANT: DTF equipment should be used in a well-ventilated area with a filtration system. We recommend using a fume extractor to handle the fumes caused by powder curing and a ventilator for filtering DTF powder if it becomes airborne due to handling. Protective gear such as gloves, safety goggles and/or smocks or aprons should be used to maintain the safety of the user. DTF inks and films require a good humidity environment - over 50% humidity is strongly advised to reduce the risk of ink clogs and film buckling. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user's risk.