This Xtreme cleaning solution is for flushing continuous ink tubing (such as when you want to change ink types), or helps to resolve stubborn/extreme clogs in printheads. For printhead cleaning, this Xtreme cleaning solution is a last resort option.

First try the regular cleaning solution for printheads, as this XTREME solution is a stronger formula. Flush your print-heads with this solution (if your system is damper/CIS based), or fill it into "cleaning cartridges" and run up to 3 cleaning cycles with those cartridges (if your system is cartridge based).

Do not use for wet capping.

NOTE: DTF equipment should be used in a well-ventilated area with a filtration system. We recommend using a fume extractor to handle the fumes caused by powder curing and a ventilator for filtering DTF powder if it becomes airborne due to handling. Protective gear such as gloves, safety goggles and/or smocks or aprons should be used to maintain the safety of the user. DTF inks and films require a good humidity environment - over 50% humidity is strongly advised to reduce the risk of ink clogs and film buckling. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user's risk.