Formulated to use during DTG Transfer (DTF), this white adhesive powder is crucial for this new technology. Cover your DTG Transfer media with this powder for optimal press. This can be used for 100% cotton, poly, nylon, and more!
NOTE: DTF equipment should be used in a well-ventilated area with a filtration system. We recommend using a fume extractor to handle the fumes caused by powder curing and a ventilator for filtering DTF powder if it becomes airborne due to handling. Protective gear such as gloves, safety goggles and/or smocks or aprons should be used to maintain the safety of the user. DTF inks and films require a good humidity environment - over 50% humidity is strongly advised to reduce the risk of ink clogs and film buckling. The use of DTF equipment, chemicals, powders, inks, and all accessories is at the user's risk. Download the Color Prime Powder Saftey Data Sheet.
| SKU | DTFST-HMP-KG |
|---|---|
| Size | 1 Kg |
Features
- DTF (Direct To Film) products work with almost all types of fabrics, including 100% cotton, polyester, nylon, and more
- Hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
- The designed fabrics or printed shirts have good wash characteristics.
- The print will have a very slight hand
DTF Hot Melt Powder Application Instructions
Application Instructions
- Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
- Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
- Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min).
- Transfer the image by heat press at 330°F for 15sec with medium pressure.
- After the first press,
- Option 1: Wait for 4-6 seconds and remove the film gently
- Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
- Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.