As Low As
$2.59
1-49
$3.11
50+
$2.59
In Stock - Available for immediate delivery
Features
| SKU | SB-U-4854 |
|---|---|
| Brand | Unisub |
| Finish | Glossy |
| Coating | White |
| Substrate | Aluminum |
| Sub Blank Size | 3.5" x 3.06" |
| Protective Film | No |
| Mirror Image | Yes |
| Substrate Color | White |
Texprint Sublimation Paper A 2-Sided Ornament
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 60 seconds.
- Set pressure at medium.
- Remove protective film from the product (if applicable).
- Print a mirror image onto Texprint Paper. The image should be larger than the substrate.
- If printing both sides of the ornament or keychain at the same time, spray the transfer paper with adhesive spray.
- Place the substrate face down on one of the printed images, and fold the paper so the other printed image aligns with the other side of the substrate. Please note; you can print one side at a time and use transfer release tape to hold the printed image in place on your substrate.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate on the bottom pad of the press.
- Cover with a non stick sheet.
- Press at 400 degrees F for 60 seconds with medium pressure
- Remove immediately from press once finished and peel hot.
- If you did not print both sides at the same time - repeat steps 7-12 once the substrate has cooled down.
Write Your Own Review