As Low As
$2.29
1-49
$2.49
50+
$2.29
In Stock - Available for immediate delivery
Features
| SKU | SB-S-049 |
|---|---|
| Finish | Glossy |
| Coating | Frosted |
| Substrate | Glass |
| Sub Blank Size | 1.5 Oz |
| Substrate Color | Gold |
Texprint Sublimation Paper on a Shot Glass with a 3D Vacuum Heat Press
Application Instructions
- Turn the 3D Vacuum Heat press on.
- Set the heating button so both the top and bottom heating lights are on.
- Set the Temperature to 200 degrees C and time to 13 minutes.
- Print a mirror image onto Texprint Paper.
- Trim the edges of the image and wrap around shot glass.
- Attach the image to shot glass using transfer release tape.
- Place the shot glasses within the mold and cover with the glass lid.
- Attach the rubber tube that is connected to the bottom of the 3D Vacuum Press to the white tube sticking out of the mold.
- Press vacuum button.
- Press the time button.
- Remove immediately once finished and peel hot. Use caution as shot glass will be very hot.
Texprint Sublimation Paper on a Shot Glass with a Mug Press
Application Instructions
- Change the heating element on the mug press to the shot glass heating element.
- Set temperature to 380-400 degrees Fahrenheit.
- Set timer to 120 seconds.
- Set Pressure at heavy.
- Print a mirror image onto Texprint Paper.
- Trim the edges of the image and wrap around mug.
- Attach the image to mug using transfer release tape.
- Press at 380-400 degrees F for 120 seconds with heavy pressure.
- Remove immediately from press once finished and peel hot.
Write Your Own Review
Check items to add to the cart or
