As Low As
$2.99
1-29
$3.49
30-59
$3.29
60+
$2.99
In Stock - Available for immediate delivery
Features
SKU | SB-S-065 |
---|---|
Brand | Best Sub |
Finish | Glossy |
Coating | Silver |
Substrate | Aluminum |
Sub Blank Size | height: 6.25" (w/o lid), diameter: 2.875" |
Protective Film | No |
Mirror Image | Yes |
Substrate Color | Silver |
Texprint Sublimation Paper on a Water Bottle with Mug Press
Application Instructions
- Set temperature to 360-400 degrees Fahrenheit.
- Set timer to 60-180 seconds.
- Set Pressure at medium.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Wrap the printed image around the water bottle and secure with heat transfer tape.
- If your water bottle is loose within the Mug Press, place a silicone pad around the water bottle.
- Press at 360-400 degrees F for 60-180 seconds with medium pressure
- Remove immediately from press once finished and peel hot. Use caution as water bottle will be very hot.
Stainless Steel In A Sublimation Oven
Application Instructions
- Set upper and lower oven temperature to 365° Fahrenheit
- Set oven timer to 6 minutes.
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure it with heat transfer tape.
- Slip your drinkware into the recommended shrink film sleeve.
- Apply heat to the shrink film using a heat gun until the film is tight on the item.
- Once the sublimation oven beeps confirming it has reached the appropriate temperature, place your item in
- the oven and close the door.
- Heat your product for 6 minutes at 365° F
- Remove immediately from oven once finished and peel hot. Use caution as the item will be very hot.
*A heat gun is required for irregular shaped drinkware. If printing on products with straight sides like a skinny tumbler, a heat gun is not needed, as the film will shrink with the heat from the oven.
Write Your Own Review