6" X 8" CERAMIC TILE

Texprint Sublimation Paper on Ceramic Tiles

Application Instructions

1. Set temperature to 400 degrees Fahrenheit.
2. Set timer to 6-8 minutes depending on tile size. The larger the tile, the longer the time should be.
3. Set Pressure at light. Use caution as the ceramic tile can crack with too much pressure.
4. Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
5. Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
6. Place a sof-fusion pressing pillow on the bottom pad of heat press to cushion the ceramic tile.
7. Place substrate face down on the heat press, with the back of the ceramic tile facing up.
8. Cover with a non stick sheet.
9. Press at 400 degrees F for 6-8 minutes with light pressure.
10. Remove immediately from press once finished and peel hot. Use caution as tile will be very hot.