As Low As
$8.19
1-24
$9.99
25-99
$8.99
100+
$8.19
In Stock - Available for immediate delivery
Features
SKU | SB-S-201A |
---|---|
Brand | Best Sub |
Finish | Glossy |
Coating | White |
Substrate | Stainless Steel |
Sub Blank Size | 9" tall and 3.125" diameter |
Protective Film | No |
Mirror Image | Yes |
Substrate Color | White |
Texprint Sublimation Paper On A Skinny Tumbler with Mug Press
Application Instructions
- Set temperature to 350 degrees Fahrenheit.
- Set timer to 80-100 seconds.
- Set Pressure at medium.
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure it with heat transfer tape.
- Press at 350 degrees F for 80-100 seconds with medium pressure.
- If printing a design that wraps around the tumbler, rotate the tumbler and press for another 80-100 seconds.
- Remove immediately from press once finished and peel hot. Use caution as the item will be very hot.
Stainless Steel In A Sublimation Oven
Application Instructions
- Set upper and lower oven temperature to 365° Fahrenheit
- Set oven timer to 6 minutes.
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure it with heat transfer tape.
- Slip your drinkware into the recommended shrink film sleeve.
- Apply heat to the shrink film using a heat gun until the film is tight on the item.
- Once the sublimation oven beeps confirming it has reached the appropriate temperature, place your item in
- the oven and close the door.
- Heat your product for 6 minutes at 365° F
- Remove immediately from oven once finished and peel hot. Use caution as the item will be very hot.
*A heat gun is required for irregular shaped drinkware. If printing on products with straight sides like a skinny tumbler, a heat gun is not needed, as the film will shrink with the heat from the oven.
Texprint Sublimation Paper on Stainless Steel with Convection Oven
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 5-7 minutes (300-420 seconds).
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure with heat transfer tape.
- Place the tumbler in a medium vacuum seal bag and tuck the opening of the bag inside the tumbler.
- Place tumbler in a convection oven at 400 F for 5-7 minutes.
- When complete remove the tumbler from the oven when hot and remove the bag and texprint paper. Use caution as the item with be very hot.
Write Your Own Review