As Low As $1.49
A gloss white ceramic coaster is the perfect addition to any table. Personalize them with a sublimated photo, business logo, or phrase. These make great gifts! Coasters measure 1/4" thick.
Stock Availability: Backordered
|Sub Blank Size||3.5”|
Texprint Sublimation Paper On Ceramic Coasters
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 6-8 minutes depending on tile size. The larger the tile, the longer the time should be.
- Set Pressure at light. Use caution as the ceramic tile can crack with too much pressure.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Place a sof-fusion pressing pillow on the bottom pad of heat press to cushion the ceramic tile.
- Place substrate face down on the heat press, with the back of the ceramic tile facing up.
- Cover with a non stick sheet.
- Press at 400 degrees F for 6-8 minutes with light pressure.
- Remove immediately from press once finished and peel hot. Use caution as tile will be very hot.
Write Your Own Review