Free Shipping On orders of $49 or more. Restrictions Apply. See Details >
As Low As $10.40
1-23
$10.79
24+
$10.40
In Stock - Available for immediate delivery

20 OZ STAINLESS STEEL SKINNY TUMBLER - WHITE GLITTER

Features
More Information
SKU SB-S-263
Finish Glitter
Substrate Stainless Steel
Sub Blank Size 8" tall and 3" diameter
Substrate Color White

Calling all glitter lovers! This is the skinny tumbler for you. The white glitter coating over stainless steel will allow a vibrant full-color sparkling print with your sublimation ink. The skinny tumbler measures 8" tall and can be printed using a mug press or convection oven. Straw included.

Textprint Sublimation Paper on Stainless Steel with Mug Press

Application Instructions

  1. Set temperature to 350 degrees Fahrenheit.
  2. Set timer to 80-100 seconds.
  3. Set Pressure at medium.
  4. Print a mirror image onto Texprint Paper. 
  5. Wrap the printed image around product and secure with heat transfer tape.
  6. Press at 350 degrees F for 80-100 seconds with medium pressure.
  7. Remove immediately from press once finished and peel hot. Use caution as item will be very hot.

Textprint Sublimation Paper on 20oz Skinny Tumbler with a 3D Vacuum Heat Press

Application Instructions

  1. Turn the 3D Vacuum Heat press on.
  2. Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing)
  3. Set the Temperature to 338 degrees F (170 degrees C) and time to 360 seconds (6 minutes).
  4. Print a mirror image onto Texprint Paper.
  5. Trim the edges of the image and wrap around the tumbler.
  6. Attach the image to tumbler using transfer release tape.
  7. Wrap tumbler with the skinny tumbler wrap.
  8. Place the tumbler on its side within the press.
  9. Press vacuum button
  10. Press the time button
  11. Remove immediately once finished and peel hot. Use caution as the tumbler will be very hot.

Textprint Sublimation Paper on Stainless Steel with Convection Oven

Application Instructions

  1. Set temperature to 400 degrees Fahrenheit.
  2. Set timer to 5-7 minutes (300-420 seconds).
  3. Print a mirror image onto Texprint Paper. 
  4. Wrap the printed image around product and secure with heat transfer tape.
  5. Place the tumbler in a medium vacuum seal bag and tuck the opening of the bag inside the tumbler.
  6. Place tumbler in a convection oven at 400 F for 5-7 minutes.
  7. When complete remove the tumbler from the oven when hot and remove the bag and texprint paper. Use caution as the item with be very hot.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account