30 OZ STAINLESS STEEL RINGNECK GRIP TUMBLER - WHITE

Texprint Sublimation Paper On A 30 oz Tumbler with Mug Press

Application Instructions

• Set temperature to 350 degrees Fahrenheit.
• Set timer to 80-100 seconds.
• Set Pressure at medium.
• Print a mirror image onto Texprint Paper.
• Wrap the printed image around product and secure it with heat transfer tape.
• Press at 350 degrees F for 80-100 seconds with medium pressure.
• If printing a design that wraps fully around the top of the tumbler, rotate the tumbler and press for another 80-100 seconds.
• Remove immediately from press once finished and peel hot. Use caution as the item will be very hot.

Note: Use heating element PL-MUGTPP05 when printing with Transpro Plus Mug press.