As Low As
$1.99
1-11
$2.59
12+
$1.99
In Stock - Available for immediate delivery
Features
| SKU | SB-S-343 |
|---|---|
| Finish | Glossy |
| Coating | White |
| Substrate | Ceramic |
| Sub Blank Size | 2.625" x 2.5" |
| Protective Film | No |
| Mirror Image | Yes |
| Substrate Color | White |
Texprint Sublimation Paper on a Ceramic Magnet
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 160 seconds.
- Set Pressure at light to medium.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Place a sof-fusion pressing pillow on the bottom pad of heat press to cushion the ceramic magnet.
- Place substrate face down on the heat press, with the back of the ceramic magnet facing up.
- Cover with a non stick sheet.
- Press at 400 degrees F for 160 seconds with light to medium pressure.
- Remove immediately from press once finished and peel hot. Use caution as magnet will be very hot.
Write Your Own Review