As low as
$4.00
1-5
$5.00
6-11
$4.50
12+
$4.00
Features
| SKU | SB-SS-1170 |
|---|---|
| Brand | Silky Socks |
| Finish | Matte |
| Coating | White |
| Substrate | Polyester |
| Protective Film | No |
| Mirror Image | Yes |
Sock Material
Foot Material: 90% Cotton, 10% Polyester/Spandex
Leg Material: 95% Polyester, 5% Rubber/spandex, Sublimation ready. White inside and out.
Sock Print Sizes
Printable area of each sock when stretched onto a Jig and ready to print W x H. All sock are unisex and can fit both men and women. Note: Size chart is just a guide, we recommend trying out the different sizes and seeing which fit you like the best and which sizes you'd like to then carry and offer your customers.
Resources
- Download the Silky Socks Pressing Guide PDF
Texprint Sublimation on Silky Socks - Knee High Athletic Socks
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 35 seconds.
- Set Pressure at medium pressure.
- Print a mirror image onto Texprint Paper.
- Place sock(s) on platen with cardboard insert.
- Place printed sheet face down on sock(s).
- Press at 400 degrees F for 35 seconds with medium pressure.
- Remove paper immediately.
- Adjust sock on cardboard insert. Roll the sides of the sock so a small sliver of printed area is on the other side.
- Position unprinted side of sock face up on platen.
- Place printed sheet face down on sock(s).
- Press at 400 degrees F for 35 seconds with medium pressure.
- Remove paper immediately.
Write Your Own Review