As Low As $5.72
This black plaque feature an ogee edge with keyhole for easy wall display. This has a gloss white finish and is made from 0.625″ (15.8 mm) thick MDF (medium dense fiberboard).
In Stock - Available for immediate delivery
7 x 9 BLACK EDGE PLAQUE
|Sub Blank Size||7" x 9"|
Texprint Sublimation Paper Plaques
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 60 seconds.
- Set Pressure at medium.
- Remove protective film from product.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face up on the heat press, with the transfer paper on top.
- Cover with a non stick sheet
- Press at 400 degrees F for 60 seconds with medium pressure
- Remove immediately from press once finished and peel hot.
Write Your Own Review