As Low As
$3.29
1-19
$3.95
20+
$3.29
In Stock - Available for immediate delivery
Features
SKU | SB-U-5827 |
---|---|
Brand | Unisub |
Finish | Glossy |
Coating | White |
Substrate | Hardboard |
Sub Blank Size | 5.25" x 6.875" |
Protective Film | Yes |
Mirror Image | Yes |
Texprint Sublimation Paper on Clipboards & Hardboards
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 70 seconds.
- Set Pressure at medium.
- Remove protective film from product. (if applicable).
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face up on the heat press, with the transfer paper on top.
- Cover with a non stick sheet.
- Press at 400 degrees F for 70 seconds with medium pressure
- Remove immediately from press once finished and peel hot.
Write Your Own Review