CLEARANCE SALE   Huge savings up to 70%    SHOP NOW >

Subliblock™ is the solution to stop dye migration. Many of today's imported polyester fabrics are colored with inexpensive low energy dyes that migrate rapidly into attached polymeric material with the application of minimal heat, or slowly over time at normal room temperature. Subliblock™ films are designed with an additional layer to prevent dye migrating or “bleeding” through your transfer image from the dyed polyester fabrics.

Choose one or more colors Hover color swatch to see larger preview.

Subliblock Vinyl By The Yard 20"

Rating:
91% of 100
item #
VN-SB-Y-15
Features
More Information
Brand Specialty Materials
SKU VN-SB-Y-15
Vinyl Application Heat Applied
Vinyl Type Subliblock
Finish Matte
Transfer Vinyl Max Colors Layerable
CPSIA Certified Yes
Home Iron Compatible Yes
Transfer Vinyl Ideal Applications Cotton/Poly Blends, Lycra / Spandex, 100% Polyester, Wool, Linen
Vinyl Thickness 5.2 mils
Features
  • Width: 20" (may vary in size)
  • Length: By the yard.
  • Carrier: Pressure sensitive backing.
Maintenance
  • Do not dry clean.
  • Machine wash COLD / mild detergent.
  • Dry at normal setting.
  • No chlorine bleach.
  • Wait 24 hours before first wash.
Special Circumstances
  • *Instructions for application to moisture-wicking materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then rub it into the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow better adhesion to the garment.
  • *Instructions for application to dazzle cloth & shiny polyester fabrics: We highly recommend that you TEST prior to doing large runs. Coated polyester can routinely cause adhesion issues.

Siser Sub Block Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester
  2. Cut in reverse
  3. Weed excess material
  4. Preheat garment for 2-3 seconds
  5. Apply design at 265°F/130°C
  6. Use medium/firm pressure for 10 - 15 seconds
  7. Peel carrier hot or cold
  8. Wait 24 hours before first wash.

Siser Sub Block Home Iron Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester
  2. Set iron dial between Cotton and Linen
  3. Cover design with Kraft paper or non-stick cover sheet
  4. Place on flat, hard surface (ironing board not recommended)
  5. Press iron with medium/firm pressure (do not slide iron)
  6. Press each section of design for 10-15 seconds
  7. If areas of design lift after application, replace cover sheet and re-press for 10 - 15 seconds
  8. Peel carrier hot or cold
  9. Wait 24 hours before first wash.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account