SISER EASYPSV PRINTABLE GLOSS 20" VINYL BY THE ROLL

Siser EasyPSV Printable Sign Vinyl Application Instructions

1. Place EasyPSV with the liner side down and cut your design. (Do not reverse/mirror your design).
2. Weed excess vinyl.
3. Remove the Application tape's paper liner and place tape on top of EasyPSV.
4. Burnish with a squeegee.
5. Lift the application tape and EasyPSV away from the paper liner.
6. Place the application tape on your desired object.
7. Burnish with a squeegee to fully adhere the design.
8. Gently peel away the application tape leaving just your EasyPSV design on the object.

Siser EasyPSV Printable Sign Vinyl Printer Settings

• Ink Types: Solvent, Eco-Solvent, Latex
• Heater/Dryer Temp: 113°F/45°C
• Dry Time: None (standard prints) or 1 hour (heavy saturation prints)
• Cut: Standard (not mirrored)

Siser EasyPSV Printable Sign Vinyl Cutter Settings

Cricut Cutter Settings:

• Blade: Standard
• Setting: Iron-On

Graphtec Cutter Settings:

• Blade: 45°
• Gram Force: 9
• Tool: CB09U+0
• Speed: 25 cm/s

Roland GS/GX-24 Cutter Settings:

• Blade: 45°
• Gram Force: 80-90
• Offset: 250
• Speed: 25-50 cm/s

Silhouette Cameo Cutter Settings:

• Blade: Standard, 3
• Material: Heat Transfer, Smooth
• Material: Smooth
• Speed: 8
• Force: 6

Scan N Cut Cutter Settings:

• Blade: Standard, 2
• Cut Speed: 1
• Cut Pressure: 2

Titan 2 & 3 Cutter Settings:

• Blade: 45°/60°
• Gram Force: 60-65
• Speed: 300mm/s
• *Blade Advancing Varies