ARIES 113 UV DTF PRINTER AND SUPPLY BUNDLE

Coupons Included

• $25 Off all digital art.
• 1 coupon per order. Cannot be combined with other coupons or promotions. The entire value of the coupon must be used on a single order.

Aries 113 UV DTF Printer Features

• Speed: 6 pass: 2.5-3.53 m²/hr • 8 pass: 1.5-2.0 m²/h
• White Ink Management System (WIMS): Timed white ink stirring system to circulate and maintain white ink inside the printer.
• Semi-Auto Laminator Pressure Control: Even pressure for bonding A and B films with a single lever.
• Passive Auto-Cleaning: When the printer is left on, it will automatically maintain and clean the printhead every 4 hours.
• Active Auto-Cleaning: During set intervals (even during printing), the printer can stop to clean the printhead.
• Head Strike Sensor: Helps prevent damage to the printhead.
• Auto-Stop: Stops printing when users open the front cover for regulation and safety purposes.
• Key Locked Back End: Enhances security at all easy-access cover panels at the back of printer.
• Auto Ink Alert System: Informs the user when ink is running low.
• Media Take-Up System: Automatically winds all the prints in a roll.

Aries 113 UV DTF Printer Specifications

• Print Head: Dual Epson XP600 (2)
• Software: DigiRIP RIP Software
• Max Film Width: 12.60” (32cm)
• Max Print Width: 11.81” (30cm)
• Printing Speed: 6 pass: 2.5-3.53 m²/hr • 8 pass: 1.5-2.0 m²/h
• Daily Output (8 hours): 500 pcs (4"x4" design size)
• Weight (lbs): Product: 88.18 lb • Packaging: 132.27 lb
• Dimensions (WxDxH): Product: 31.29" x 12.99" x 17.40" • Packaging: 33.46" x 19.29" x 25.55"
• Power Requirements: 500W / 110V / 4.54A

Color Prime UV DTF Film Features

• Versatile Material Printing - Prints directly on flexible film which allows printing on a wider range of materials.
• High-Quality Results - Sharp and clear prints with no pixelation.
• Durability and Adhesion - High-quality film ensures impeccable adhesion to various surfaces.

Color Prime UV Film Specifications

• A Film - White, Adhesive/Printable Surface
• A Film Size: Length: 109 yd, Actual Width: 12.20” (32cm), Printable Width: 11.81” (30cm)
• B Film - Lamination
• B Film Size: Length: 109 yd, Actual Width: 11.81” (30cm), Printable Width: 11.81” (30cm)
• Storage Conditions: Temperature: 25 °C (+-2 °C) / 77 °F (+-5 °F) - Humidity: 45%-65%
• Usage & Expiration: Recommended to use film within 2-4 weeks of opening for most optimal printing results. Unopened packaging lasts approx. 1 year.

Color Prime Cleaning & Maintenance Solution Features

• Powerful Cleaning Action: Color Prime UV DTF Maintenance Solution boasts a potent formula designed to effectively remove ink residues, dust, and other contaminants from your printer's components.
• Gentle on Equipment: Formulated with DTF Station UV DTF printers in mind, this maintenance solution is powerful but gentle, preventing any potential damage while maintaining optimal functionality.

Color Prime UV Ink Specifications

• Size: 1kg
• Colors: CMYKW + Varnish
• Download The Color Prime UV Ink Safety Data Sheet.

Color Prime UV Ink & Solutions Use & Storage Instructions

• Use in normal temperature (56°F - 95°F).
• Protective Gear: When handling UV DTF ink, always wear gloves, safety goggles, and a lab coat or apron to prevent skin contact and eye exposure.
• Ventilation: Work in a well-ventilated area or use exhaust fans to remove fumes and maintain good air quality. Avoid inhaling fumes or vapors.
• Skin Contact: In case of accidental skin contact, immediately wash the affected area with soap and water. If irritation or redness persists, seek medical attention.
• Eye Contact: If UV DTF ink comes into contact with your eyes, rinse them with plenty of clean, lukewarm water for at least 15 minutes and seek immediate medical attention.
• Ingestion: Never ingest UV DTF ink. If accidentally ingested, contact a poison control center or seek medical help immediately.
• Storage: Store in a well ventilated place in original, properly labeled container between 41°F to 104°F. Keep away from sunlight. Keep container closed. Keep out of the reach of children and pets.
• Mixing and Dilution: Do not mix UV DTF ink with other substances unless explicitly instructed by the manufacturer. Improper mixing can result in hazardous reactions.
• Disposal: Dispose of used ink and containers in accordance with local, state, and federal regulations. Avoid pouring ink down drains or into the environment.

Applications:

• Signage and Banners: Various sign materials, such as PVC, acrylic, foam board, and corrugated plastic (suitable for short-term outdoor and indoor signage)
• Promotional Items: personalize and brand promotional products like pens, keychains, USB drives, and phone cases.
• Packaging: materials like cartons, boxes, and labels, offering customization and branding options for businesses.
• Labels and Stickers: durable labels and stickers for product labeling, barcoding, or branding purposes
• Glass and Ceramics: decorative glassware, drinkware, ceramic tiles, and more.
• Wood and Plywood: wooden surfaces, creating custom furniture, signage, and art on wood.
• Metal: aluminum, brass, and stainless steel, and personalized metal products.
• Leather and Leather Products: customized leather goods, including wallets, bags, and footwear.
• 3D Objects: prototypes and custom packaging for unique-shaped items.
• Flooring and Tiles: custom designs tiles and other flooring materials.

Get The DigiRIP Software

Click for the DigiRIP Trial Version (15 Day) - Windows Only - License to activate software will be sent after purchase.

DigiRIP System Requirements

• Operating System: Windows 7, 8, or 10 (32/64 bit)
• Processor: 2 GHz or faster
• RAM: 4 GB or more
• Hard Disk Space: 2 GB or more
• Display: 1024 x 768 resolution or higher
• Connectivity: USB 2.0

Resources

• Download Aries 113 Manual
• Download Aries 113 Maintenance Chart
• Download Aries 113 Warranty