As Low As
$7.29
1-11
$7.99
12+
$7.29
Stock Availability:
Backordered
Features
| SKU | SB-S-131 |
|---|---|
| Finish | Glossy |
| Substrate | Stainless Steel |
| Sub Blank Size | 16oz. - 6.25" tall and 3.5" diameter at the top |
| Substrate Color | Silver |
Textprint Sublimation Paper on Stainless Steel with Mug Press
Application Instructions
- Set temperature to 350 degrees Fahrenheit.
- Set timer to 80-100 seconds.
- Set Pressure at medium.
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure with heat transfer tape.
- Press at 350 degrees F for 80-100 seconds with medium pressure.
- Remove immediately from press once finished and peel hot. Use caution as item will be very hot.
Textprint Sublimation Paper on a Tumbler Mug with 3D Vacuum Press
Application Instructions
- Turn the 3D Vacuum Heat press on.
- Set the Temperature to 392 degrees F (200 degrees C) and time to 5-6 minutes.
- Set the heating button so both the top and bottom heating lights are on.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Wrap the printed image around the Tumbler and secure with heat transfer tape.
- Place the tumbler in a tumbler wrap (SB-S-071) and secure the top.
- Open the 3D vacuum press and connect the clear tube to the lid of the tumbler wrap.
- Press vacuum button.
- Press the time button.
- At the halfway point, open the top lid and flip the tumbler so it is resting on the other side. Close lid to complete the sublimation process.
- Remove immediately once finished and peel hot. Use caution as tumbler will be very hot.
Write Your Own Review