As Low As
$2.99
1-39
$3.49
40-79
$3.19
80+
$2.99
In Stock - Available for immediate delivery
Features
| SKU | SB-S-236C |
|---|---|
| Brand | Best Sub |
| Finish | Glossy |
| Coating | White |
| Substrate | Slate |
| Sub Blank Size | 4x4 |
| Protective Film | No |
| Mirror Image | Yes |
| Substrate Color | White |
Texprint Sublimation Paper on a Rock Slate with a Heat Press
Application Instructions
- Set temperature to 356 degrees Fahrenheit.
- Set timer to 420 seconds (7 minutes) depending on the rock slate size. The larger the rock slate, the longer the time should be.
- Set Pressure at medium. Use caution as the rock slate can crack with too much pressure.
- Print a mirror image onto Texprint Paper. Image should be larger than the substrate.
- Place the substrate face down on the transfer paper and tape the paper to the substrate using transfer release tape.
- Place substrate face up on the heat press.
- Press at 356 degrees F for 420 seconds with medium pressure.
- Remove immediately from press once finished and peel hot. Use caution as rock slate will be very hot.
Write Your Own Review