As Low As
$7.99
1-24
$9.79
25-99
$9.19
100+
$7.99
In Stock - Available for immediate delivery
Features
| SKU | SB-S-265 |
|---|---|
| Brand | Best Sub |
| Finish | Glossy |
| Coating | White |
| Substrate | Stainless Steel |
| Sub Blank Size | 6" tall and 3" diameter |
| Protective Film | No |
| Mirror Image | Yes |
| Substrate Color | White |
Not compatible with the TransPro Mug Press or TransPro 3-in-1 mug press when using the 20oz skinny heating element.
Texprint Sublimation Paper on Stainless Steel with Mug Press
Application Instructions
- Set temperature to 350 degrees Fahrenheit.
- Set timer to 80-100 seconds.
- Set Pressure at medium.
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure with heat transfer tape.
- Press at 350 degrees F for 80-100 seconds with medium pressure.
- Remove immediately from press once finished and peel hot. Use caution as item will be very hot.
Texprint Sublimation Paper on 20oz Skinny Tumbler with a 3D Vacuum Heat Press
Application Instructions
- Turn the 3D Vacuum Heat press on.
- Set the heating button so both the top and bottom heating lights are on. (2 red lights will be showing)
- Set the Temperature to 338 degrees F (170 degrees C) and time to 360 seconds (6 minutes).
- Print a mirror image onto Texprint Paper.
- Trim the edges of the image and wrap around the tumbler.
- Attach the image to tumbler using transfer release tape.
- Wrap tumbler with the skinny tumbler wrap.
- Place the tumbler on its side within the press.
- Press vacuum button
- Press the time button
- Remove immediately once finished and peel hot. Use caution as the tumbler will be very hot.
Stainless Steel In A Sublimation Oven With Mug Wrap
Application Instructions
- Set upper and lower oven temperature to 383° Fahrenheit
- Set oven timer to 12 minutes.
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure it with heat transfer tape.
- Slip your drinkware into the recommended mug wrap.
- Once the sublimation oven beeps confirming it has reached the appropriate temperature, place your item in
- the oven and close the door.
- Heat your product for 12 minutes at 383° F
- Remove immediately from oven once finished and peel hot. Use caution as the item will be very hot.
Texprint Sublimation Paper on Stainless Steel with Convection Oven
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 5-7 minutes (300-420 seconds).
- Print a mirror image onto Texprint Paper.
- Wrap the printed image around product and secure with heat transfer tape.
- Place the tumbler in a medium vacuum seal bag and tuck the opening of the bag inside the tumbler.
- Place tumbler in a convection oven at 400 F for 5-7 minutes.
- When complete remove the tumbler from the oven when hot and remove the bag and texprint paper. Use caution as the item with be very hot.
Write Your Own Review