10% OFF SUBLIMATION BLANKS    No coupon needed. Exclusions apply.    SHOP NOW >
As Low As $9.29
1-23
$9.99
24+
$9.29

Keep hydrated with this 22oz double wall stainless steel flask. The white glossy surface is ready for a full-color sublimation print. The lid includes a handle to make the flask easy to carry or accessible to hook to your gear during a hike.

When printing with a sublimation oven use 9.8 x 4.9" shrink wraps.

In Stock - Available for immediate delivery

22 OZ STAINLESS STEEL FLASK WITH STRAW AND PORTABLE LID - WH

Rating:
100% of 100
item #
SB-S-270
Features
More Information
SKU SB-S-270
Brand Best Sub
Finish Glossy
Coating White
Substrate Stainless Steel
Sub Blank Size 10.2" tall
Protective Film No
Mirror Image Yes
Substrate Color White

Texprint Sublimation Paper on Stainless Steel with Mug Press

Application Instructions

  1. Set temperature to 350 degrees Fahrenheit.
  2. Set timer to 80-100 seconds.
  3. Set Pressure at medium.
  4. Print a mirror image onto Texprint Paper. 
  5. Wrap the printed image around product and secure with heat transfer tape.
  6. Press at 350 degrees F for 80-100 seconds with medium pressure.
  7. Remove immediately from press once finished and peel hot. Use caution as item will be very hot.

Stainless Steel In A Sublimation Oven

Application Instructions

  1. Set upper and lower oven temperature to 365° Fahrenheit
  2. Set oven timer to 6 minutes.
  3. Print a mirror image onto Texprint Paper.
  4. Wrap the printed image around product and secure it with heat transfer tape.
  5. Slip your drinkware into the recommended shrink film sleeve.
  6. Apply heat to the shrink film using a heat gun until the film is tight on the item.
  7. Once the sublimation oven beeps confirming it has reached the appropriate temperature, place your item in
  8. the oven and close the door.
  9. Heat your product for 6 minutes at 365° F
  10. Remove immediately from oven once finished and peel hot. Use caution as the item will be very hot.

*A heat gun is required for irregular shaped drinkware. If printing on products with straight sides like a skinny tumbler, a heat gun is not needed, as the film will shrink with the heat from the oven.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account