As Low As
$2.52
1-49
$3.02
50+
$2.52
Stock Availability:
Backordered
Features
| SKU | SB-U-4332 |
|---|---|
| Brand | Unisub |
| Finish | Glossy |
| Coating | White |
| Substrate | Aluminum |
| Sub Blank Size | 2.87" x 3" |
| Protective Film | No |
| Mirror Image | Yes |
Texprint Sublimation Paper On Metal Ornaments
Application Instructions
- Set temperature to 400 degrees Fahrenheit.
- Set timer to 60 seconds.
- Set Pressure at medium.
- Print a mirror images onto Texprint Paper. Images should be larger than the substrate.
- Remove protective film (if applicable).
- Place the substrate face down on one of the printed images, and tape the design securely to the metal
- Put a blank sheet of paper on heat press platen to keep it clean.
- Place substrate face up on the heat press, with the transfer paper on top.
- Cover with a non stick sheet.
- Press at 400 degrees F for 60 seconds with medium pressure
- Remove immediately from press once finished and peel hot.
- Repeat steps 6-11 if the ornament is 2-sided.
Write Your Own Review
Check items to add to the cart or
