Write it, Wipe it, Repeat! Now you can turn any fabric into a writable surface that can be used over and over again! New BlackBoard™ heat transfer vinyl by Siser®, transforms plain materials into a walking chalkboard – without making you feel like a walking sandwich board! Lightweight and super soft, BlackBoard is unlike any HTV you’ve ever experienced. With a low application temperature and warm peel carrier, this HTV is ideal for heat sensitive materials. Compatible with standard chalk, Blackboard is as easy to re-use as it is to apply. Simply wipe clean with a damp cloth to start again! There are countless ways to advertise, organize, and customize with BlackBoard heat transfer vinyl.
| Brand | Siser |
|---|---|
| SKU | VN-SBB-Y-15 |
| Vinyl Application | Heat Applied |
| Vinyl Type | BlackBoard |
| Finish | Matte |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, 100% Polyester |
| Vinyl Thickness | 3.5 mils |
Features
- Width: 14.5" +/- (may vary in size)
- Length: By the roll.
- Carrier: Pressure sensitive backing
- Can be layered
Maintenance
- Do not dry clean.
- Machine wash COLD / mild detergent.
- Dry at normal setting.
- No chlorine bleach.
- Wait 24 hours before first wash.
Resources
Siser Blackboard Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 275°F/135°C
- Use light/medium pressure for 15 seconds
- Peel carrier warm or cold
- Wait 24 hours before first wash.
Siser Blackboard Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
- Wait 24 hours before first wash.
Siser Blackboard Vinyl Cutter Settings
Brother Cutter Settings
- Blade: 2
- Cut Speed: 1
- Cut Pressure: 1
Cricut Cutter Settings
- Blade: Standard
- Setting: Paper
Galaxy Cutter Settings
- Blade: 45°/60°
- Gram Force: 60-65
- Speed: 300mm/s
- *Blade Advancing Varies
Roland Cutter Settings
- Blade: 45°
- Force: 70g-80g
- Offset: .250
- Speed: 50 cm/s
Silhouette Cutter Settings
- Blade: Standard, 2
- Setting: Heat Transfer
- Material: Smooth
- Speed: 5
- Thickness: 8