Sale on select colors!
Price Per Yard (per color)
1-4
$15.99
5+
$12.59
Features
Brand | Siser |
---|---|
SKU | VN-BR-Y-20 |
Vinyl Application | Heat Applied |
Vinyl Type | Brick |
Finish | Semi Gloss |
Transfer Vinyl Max Colors | Layering not recommended |
CPSIA Certified | Yes |
Home Iron Compatible | Yes |
Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, 100% Polyester |
Vinyl Thickness | 23.6 mils |
Features
- Width: 19.5" +/- (may vary in size)
- Length: By the yard.
- Blade 40/60 degree
- Carrier: Static backing.
Maintenance
- Do not dry clean.
- Machine wash WARM / mild detergent.
- Hang to dry.
- No chlorine bleach.
- Wait 24 hours before first wash.
Resources
Siser Brick Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 310°F/155°C
- Use medium/firm pressure for 20 seconds
- Peel carrier cold
- Wait 24 hours before first wash.
Siser Brick Home Iron Application Instructions
Application Instructions
- 100% cotton, Poly/cotton blends, 100% polyester
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 10 seconds
- Peel carrier cold
- Wait 24 hours before first wash.
Siser Brick Vinyl Cutter Settings
Brother Cutter Settings
- Blade: 7
- Cut Speed: 5
- Half Cut: Auto
Brother Scan N Cut DX Cutter Settings
- Blade: Standard, 7
- Cut Speed: 1
- Cut Pressure: 2
Cricut Explore Air Cutter Settings
- Blade: AutoBlade, Standard
- Setting: Cardstock Light+
Cricut Maker Cutter Settings
- Blade: AutoBlade, Fine-Point
- Setting: Cardstock
Graphtec Cutter Settings
- Blade: 60°
- Gram Force: 11-12
- Speed: 25cm/s
- *Tool: CBO9U+0
Juliet/Romeo Cutter Settings
- Blade: Juliet 45°
- Force: 5-10
- Offset: 0.250
- Speed: 10
Mimaki CG-60SR III
- Blade: 60°
- Gram Force: 140
- Offset: 30
- Speed: 20-30 cm/s
Roland Cutter Settings
- Blade: 60°
- Gram Force: 150-190
- Offset: .250
- Speed: 30-50 cm/s
Silhouette Cutter Settings
- Blade: AutoBlade, 7
- Material: Heat Transfer Smooth
- Speed: 8
- Thickness: 6
US Titan 2 & 3 Cutter Settings
- Blade: 60°
- Gram Force: 120-130
- Speed: 300 mm/s
- *Blade Advancing Varies
Write Your Own Review