EasyReflective is Siser’s only reflective material with a pressure sensitive backing! This highly reflective heat transfer vinyl is constructed with glass bead technology to illuminate the darkest of conditions. EasyReflective is a truly exceptional polyurethane product due to its pressure sensitive carrier that allows you to re-stick lifting material or replace a piece that’s accidentally removed. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, or construction crew uniforms.
| Brand | Siser |
|---|---|
| SKU | VN-ER-Y-20 |
| Vinyl Application | Heat Applied |
| Vinyl Type | EasyReflective |
| Finish | Reflective |
| Transfer Vinyl Max Colors | Layerable |
| CPSIA Certified | Yes |
| Home Iron Compatible | Yes |
| Transfer Vinyl Ideal Applications | 100% Cotton, Cotton/Poly Blends, Nylon, 100% Polyester |
| Vinyl Thickness | 5.5 mils |
Features
- 1 color available
- Width: 19.5"+/- (may vary in size)
- Length: By the yard.
- Suitable for Cotton, polyester, poly/cotton blends, and nylon (testing recommended)
- Thickness : 140 microns (USA : 5.5 mil)
- Carrier: Pressure sensitive frosted backing.
Maintenance
- Do not dry clean.
- Machine wash WARM or COLD / mild detergent.
- Dry at low setting or hang dry.
- No chlorine bleach.
- Wait 24 hours before first wash.
Resources:
Siser EasyReflective Application Instructions
Application Instructions
- Suitable for Cotton, polyester, poly/cotton blends, and nylon (testing recommended)
- Cut in reverse
- Weed excess material
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
- Wait 24 hours before first wash.
Siser EasyReflective Home Iron Application Instructions
Application Instructions
- Suitable for Cotton, polyester, poly/cotton blends, and nylon (testing recommended)
- Set iron dial between Cotton and Linen
- Cover design with Kraft paper or non-stick cover sheet
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 10 seconds
- Wait 24 hours before first wash.
Siser EasyReflective Vinyl Cutter Settings
Brother Scan N Cut DX Cutter Settings
- Blade: 45°
- Gram Force: 80-90 Offset: .250
- Speed: 30-50 cm/s
Cricut Explore Air Cutter Settings
- Blade: AutoBlade, Standard
- Setting: Iron-on+
Cricut Maker Cutter Settings
- Blade: AutoBlade, Fine-Point
- Setting: Heat Transfer
- (Non-Cricut)
Graphtec Cutter Settings
- Blade: 45°
- Gram Force: 8-9
- Tool: CB09U+0
- Speed: 30 cm/s
Juliet/Romeo Cutter Settings
- Blade: Juliet 45°
- Gram Force: 5-10
- Offset: 0.250
- Speed: 10
Roland Cutter Settings
- Blade: 45°
- Gram Force: 80-90
- Offset: .250
- Speed: 30-50 cm/s
Silhouette Cutter Settings
- Blade: AutoBlade, 3
- Material: Heat Transfer
- Smooth Force: 6
- Speed: 8