CLEARANCE SALE   Huge savings up to 70%    SHOP NOW >

59" EasyWeed™ is ideal for large vinyl production. Sold in 50 yard rolls.

Choose one or more colors Hover color swatch to see larger preview.

Siser Easyweed 59" x 50 yd Roll

Features
More Information
Brand Siser
SKU VN-EW-Y-59
Vinyl Application Heat Applied
Vinyl Type EasyWeed
Finish Semi Gloss
Transfer Vinyl Max Colors Layerable
CPSIA Certified Yes
Home Iron Compatible Yes
Transfer Vinyl Ideal Applications 100% Cotton, Cotton/Poly Blends, Leather, 100% Polyester
Vinyl Thickness 3.5 mils
Features
  • Width: 58" +/-
  • Length: 50 yd roll
  • Carrier: Pressure sensitive backing.
Maintenance
  • Do not dry clean.
  • Machine wash WARM / mild detergent.
  • Dry at normal setting.
  • No chlorine bleach.
  • Wait 24 hours before first wash.
Resources

Siser EasyWeed Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester, Leather.
  2. Cut in reverse
  3. Weed excess material
  4. Preheat garment for 2-3 seconds
  5. Apply design at 305°F/150°C
  6. Use medium pressure for 10-15 seconds
  7. Peel carrier hot or cold
  8. Wait 24 hours before first wash.

Siser EasyWeed Home Iron Application Instructions

Application Instructions

  1. 100% cotton, Poly/cotton blends, 100% polyester
  2. Set iron dial between Cotton and Linen
  3. Cover design with Kraft paper or non-stick cover sheet
  4. Place on flat, hard surface (ironing board not recommended)
  5. Press iron with medium/firm pressure (do not slide iron)
  6. Press each section of design for 10-15 seconds
  7. If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  8. Peel carrier hot or cold
  9. Wait 24 hours before first wash.

Siser EasyWeed Vinyl Cutter Settings

Brother Cutter Settings
  • Blade: 2
  • Cut Speed: 1
  • Cut Pressure: 1
Brother Scan N Cut DX Cutter Settings
  • Blade: Autoblade
  • Cut Speed: 5
  • Half Cut: Auto
Cricut Cutter Settings
  • Blade: Standard
  • Setting: Iron-on
Galaxy Cutter Settings
  • Blade: 45°/60°
  • Gram Force: 60-65
  • Speed: 300mm/s
  • *Blade Advancing Varies
GCC Cutter Settings
  • Blade: 45˚
  • Gram Force: 80
  • Offset: .250
  • Speed: 30 cm/s
Graphtec Cutter Settings
  • Blade: 45°
  • Gram Force: 8-9
  • Tool: CB09U+0
  • Speed: 30 cm/s
Juliet/Romeo Cutter Settings
  • Blade: Juliet 45°
  • Gram Force: 5-10
  • Offset: 0.250
  • Speed: 10
Roland Cutter Settings
  • Blade: 45°
  • Gram Force: 80-90
  • Offset: .250
  • Speed: 25-50 cm/s
Silhouette Cutter Settings
  • Blade: Standard, 3
  • Setting: Heat Transfer Material (smooth)
  • Speed: 8
  • Thickness: 6

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account